1.电源线和电机电源线的安装

当安装电动伸缩门的电源线和电机的电源线，则应该选择合适的铜芯护套线，并严格按照说明书的规范进行安装。所述电源和所述电源的中性导线的火线不能在安装了控制器的位置被反向连接。电动门马达和报警应连接到在机器中的指定终端块。因为有许多内部接线端子，记住不连接到倒车位置。

1. Installation of power cord and motor power cord

When installing the power cord of the electric retractable door and the power cord of the motor, the appropriate copper core sheathing wire should be selected and installed in strict accordance with the specifications of the manual. The live wire of the power supply and the neutral wire of the power supply cannot be reverse connected at the location where a controller is installed. The electric door motor and alarm shall be connected to the specified terminal block in the machine. Because there are many internal terminals, remember not to connect to the reverse position.

2.布线安装

安装接线时，高性价比的电动伸缩门会给出一个正确的连接指令。要小心，不要连接低压控制线和在反向的高电压控制线，否则会容易造成机器内部短路，导致要正确安装电动伸缩门。当不能适用门发生的情况。接线的这一步必须严格遵循电气安全操作。

2. Install cables

When installing the wiring, the cost-effective electric retractable door will give a correct connection instruction. Be careful not to connect the low voltage control line and the high voltage control line in the reverse direction, otherwise it will easily cause a short circuit inside the machine, resulting in the correct installation of the electric telescopic door. What happens when a gate cannot be applied. Electrical safety must be strictly followed in this step of wiring.

3.检查

电动伸缩门的高度应很好地控制，并且从地面的距离不应大于指定的参数越高。此外，引线电缆应仔细沿着壁固定的，并且它们不应当被随机放置，这可能导致在电缆电路的损坏，并导致其它电路的问题。在接通电源前，安装的结果可以开启和使用前必须进行全面的检查工作。